雙組份打膠機在使用過程中也會呈現一些非常簡略的問題，比方報警是怎么回事?往往很簡略是事情，讓不明白的您措手不及，下面我們給大家講一下呈現的原因以及處理辦法，讓您萬一呈現問題的時分能以及的檢修，開始工作。
In the process of using the two-component gluing machine, there will be some very simple problems, such as what's the matter with the alarm? It's often a very simple thing, which makes you unprepared if you don't understand. Let's talk about the reasons and solutions, so that you can start to work in case of the problem.
一：就應該是管路堵了，膠壓力超高報警，看看膠壓力有沒有超高，超高的話清洗管路。
1： It should be that the pipeline is blocked. If the glue pressure is too high, give an alarm. Check if the glue pressure is too high. If it is too high, clean the pipeline.
二：雙組份打膠機看看是不是伺服電機報警，看看配電柜里的伺服控制器有沒有報警的。
2： Two component glue machine to see if the servo motor alarm, to see if the servo controller in the power distribution cabinet alarm.

雙組份打膠機故障剖析：
Failure analysis of two-component glue machine:
1、機頭前進定位螺栓松動。處理方法：調理好并固定好
1. The head forward positioning bolt is loose. Treatment: conditioning and fixed
2 、玻璃定位松動，使其失去作用。處理方法：調定好定位。
2. The positioning of the glass is loose, making it useless. Treatment method: set the positioning.
3、 活動量太大或吸盤的真空發生器損壞。處理方法：維修。
3. The amount of activity is too large or the vacuum generator of the suction cup is damaged. Treatment: maintenance.
4前移氣缸的前進力量太大。處理方法：調理前進速度。
The forward force of the forward moving cylinder is too large. Treatment: conditioning forward speed.
假如您是購買的我們的產品，能夠聯絡我們的業務人員或許售后，我們給您提供電話處理和上門服務，讓您一次購買設備，終身無憂。
If you are buying our products, you can contact our sales personnel or after-sales service. We provide you with telephone processing and door-to-door service, so that you can purchase the equipment once and have no worries for life.