丁基膠涂布機的使用與維修
Use and Maintenance of Butyl Rubber Coater
丁基膠涂布機是做槽鋁式中空必須用的設備，目前咱們國內設備廠家一般用的系統一種是液壓，一種是氣液增壓，
Butyl rubber coating machine is a necessary equipment for making aluminum hollow groove. At present, our domestic equipment manufacturers generally use hydraulic pressure and gas-liquid pressurization systems,

現在國內大多數廠家是氣液增壓。
At present, most domestic manufacturers are gas-liquid superchargers.
丁基膠涂布機常見的問題是：
Common problems of butyl rubber coater are:
1：不出膠，原因是丁基膠里面有雜質，把出膠口堵住了，清洗膠頭即可。
1: No glue is released, because there are impurities in butyl glue, which block the glue outlet, and clean the glue head.
2：不粘膠，原因是丁基膠有雜質，或者是加熱棒有壞的，還有就是壓力不夠。
2: It is not sticky, because the butyl rubber has impurities, or the heating rod is broken, and the pressure is not enough.
3：出膠沒有壓力，原因是電磁換向閥有卡閥現象，或者五通閥有卡閥。
3: There is no pressure for glue discharge, because the solenoid directional valve is jammed, or the five way valve is jammed.
以上就是為大家介紹的有關丁基膠涂布機詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.wkrd.com.cn
The above is a detailed introduction of butyl rubber coater for you, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude http://www.wkrd.com.cn